Re: [CAD_CAM_EDM_DRO] Re:Re: I'm impressed. Anyone want to write the G-Code for this? (I made one!)

Is it just me or is the web page referenced below not functioning properly.
It appears that there is a table of text covering the links and no way for
me to get to anywhere showing a g-code download for a cube within a cube.

Do I need to access this page with something other than Internet Explorer
6.0?

Daniel J. Statman, Statman Designs
www.statmandesigns.com

----- Original Message -----
From: <glee@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, February 02, 2002 11:34 AM
Subject: Re: [CAD_CAM_EDM_DRO] Re:Re: I'm impressed. Anyone want to write
the G-Code for this? (I made one!)


>
>
> I made a cube simular to this. I used a 1/4" end mill and a 2" cube of
> pine.
>
> I credit the training to Greg Carmack at
> http://www.geocities.com/yethdear0/
>
>
>
> This is a fun program to run. The final result is a caged cube that will
> keep people guessing as to "How'd you do that?" This project was
> originally developed as a "hand programming" project for one on our
> training courses. The download contains the "G" code program and a set-up
> document that explains in detail how to set the project up and
> successfully machine it.
>
>
>
>
>
>
> The link is 2/3 down on this page:
> http://www.geocities.com/yethdear0/WEBPAGE3.htm
>
>
> I hope this helps. I had a lot of fun with this.
>
> Thanks Greg!
>
>
> -Eric Mack
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>