Re: [CAD_CAM_EDM_DRO] servo motor ID

> Sure. The only problems are you won't get full RPM, and you have no idea
>of the current needed to get 150 In-Lb peak.

FWIW - To give an idea of scale, the Emerson DX490 brushless servos on my
mill are 90in.lbs (4" sqr body) - rated at 240v, 14amp, 3.19hp. (Continuous)
180in.lbs peak Peak torque being 2x continuous torque.

You mentioned 25in.lbs to150in.lbs peak = 6x continuous torque. Looks to me
like it might be 75in.lbs continuous, especially with the 5" case.

- Keith





_________________________________________________________
Do You Yahoo!?
Get your free @... address at http://mail.yahoo.com