CAD CAM EDM DRO - Yahoo Group Archive

Re: grease gun conversion

Posted by mikep_95133
on 2002-02-09 19:36:09 UTC
Thanks Jon.

Mike

--- In CAD_CAM_EDM_DRO@y..., Jon Elson <elson@p...> wrote:
> mikep_95133 wrote:
>
> > I remember reading sometime ago, that someone converted a gerase gun
> > to an oil gun for the zerks on their machine.
> >
> > I have the same problem. I have an old mill with zerks, and oiling is
> > pain.
>
> Get the small (8 Oz. ?) grease gun, remove the plunger and plug the
> hole in the barrel. Fill barrel with way oil and insert into pump head.
> Some people use teflon tape on the threads to stop leakage.
> Turn it handle up to pump oil, store handle down to keep it from
> dripping.
>
> Jon

Discussion Thread

mikep_95133 2002-02-09 08:51:04 UTC grease gun conversion Jon Elson 2002-02-09 10:11:36 UTC Re: [CAD_CAM_EDM_DRO] grease gun conversion Sven Peter 2002-02-09 12:18:58 UTC Re: [CAD_CAM_EDM_DRO] grease gun conversion Bill Vance 2002-02-09 16:24:42 UTC Re: [CAD_CAM_EDM_DRO] grease gun conversion mikep_95133 2002-02-09 19:36:09 UTC Re: grease gun conversion