Re: [CAD_CAM_EDM_DRO] grease gun conversion
Posted by
Jon Elson
on 2002-02-09 10:11:36 UTC
mikep_95133 wrote:
hole in the barrel. Fill barrel with way oil and insert into pump head.
Some people use teflon tape on the threads to stop leakage.
Turn it handle up to pump oil, store handle down to keep it from
dripping.
Jon
> I remember reading sometime ago, that someone converted a gerase gunGet the small (8 Oz. ?) grease gun, remove the plunger and plug the
> to an oil gun for the zerks on their machine.
>
> I have the same problem. I have an old mill with zerks, and oiling is
> pain.
hole in the barrel. Fill barrel with way oil and insert into pump head.
Some people use teflon tape on the threads to stop leakage.
Turn it handle up to pump oil, store handle down to keep it from
dripping.
Jon
Discussion Thread
mikep_95133
2002-02-09 08:51:04 UTC
grease gun conversion
Jon Elson
2002-02-09 10:11:36 UTC
Re: [CAD_CAM_EDM_DRO] grease gun conversion
Sven Peter
2002-02-09 12:18:58 UTC
Re: [CAD_CAM_EDM_DRO] grease gun conversion
Bill Vance
2002-02-09 16:24:42 UTC
Re: [CAD_CAM_EDM_DRO] grease gun conversion
mikep_95133
2002-02-09 19:36:09 UTC
Re: grease gun conversion