Re: bleed resistor
Posted by
chewy8833
on 2002-02-12 05:43:11 UTC
--- In CAD_CAM_EDM_DRO@y..., Scot Rogers <scotr@b...> wrote:
to the power supply is one big bleed resister. Assuming your on/off
switch is off on the primary side, the drives will consume power
until it is bled off the caps. On my setup this takes about 5 sec to
do this.
Frank
> So I'm setting up my control box, Surplus geckos and a big oltransformer.
> My buddie and I have done all of the calculations to the best of our3300uf
> knowlege. One thing eludes me. I have a paralell array of three
> capacitors and I was wondering if any of great electrical knowlegewould
> happen to know what rating of bleed resistor I would need to set atthe end
> of the array.Can't answer that one ,....But I thought that what ever is connected
> Like I said 3300uf at 80V of capacitor rating.
>
> Bueler?....Bueler?....Bueler?
>
> Scot Rogers
>
> /?*$#@%!&*
> -------------------------------------------
> Give me open source, or give me open sores!
> -------------------------------------------
to the power supply is one big bleed resister. Assuming your on/off
switch is off on the primary side, the drives will consume power
until it is bled off the caps. On my setup this takes about 5 sec to
do this.
Frank
Discussion Thread
JanRwl@A...
2002-02-11 19:43:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Correct or Max voltage for Bridgeport Nema 42? + mo...
studleylee
2002-02-11 20:09:28 UTC
Re: Correct or Max voltage for Bridgeport Nema 42? + mo...
Scot Rogers
2002-02-11 23:27:34 UTC
bleed resistor
Matthew King
2002-02-12 00:38:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: Correct or Max voltage for Bridgeport Nema 42? + mo...
chewy8833
2002-02-12 05:43:11 UTC
Re: bleed resistor
studleylee
2002-02-12 06:01:12 UTC
Re: Correct or Max voltage for Bridgeport Nema 42? + mo...
Tony Jeffree
2002-02-12 08:58:38 UTC
Re: bleed resistor
Jon Elson
2002-02-12 11:03:47 UTC
Re: [CAD_CAM_EDM_DRO] bleed resistor
Scot Rogers
2002-02-12 11:57:32 UTC
RE: [CAD_CAM_EDM_DRO] bleed resistor
tonyjeffree
2002-02-12 19:58:04 UTC
Re: bleed resistor
Jon Elson
2002-02-12 22:44:46 UTC
Re: [CAD_CAM_EDM_DRO] bleed resistor
studleylee
2002-04-12 15:23:47 UTC
SERIES BUCKING was Re: Correct or Max voltage for Bridgeport Nema 42
Alan Marconett KM6VV
2002-04-12 18:26:08 UTC
Re: [CAD_CAM_EDM_DRO] SERIES BUCKING was Re: Correct or Max voltage for Bridgeport Nema 42