CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] bleed resistor

Posted by Scot Rogers
on 2002-02-12 11:57:32 UTC
Thanks to you too Jon. It's times like these and people like you that make
me wish that I'd learned more in school.


Scot Rogers




~>
~> Like I said 3300uf at 80V of capacitor rating.
~
~Well, the 80 V is the most important thing. So, you can put a 5 K Ohm
~resistor across it, and it will draw 16 mA. You can put an LED in
~series with
~
~this and have a caps still charged indicator. The time constant
~(RC) = 49.5 seconds, so the caps will drain to 36% of 80 V in 49.5 seconds.
~That will be 28 V. That will be safe to touch, but not safe to
~accidentally
~short
~out. When the LED is out, it will be safe to short it out, too.

Discussion Thread

JanRwl@A... 2002-02-11 19:43:10 UTC Re: [CAD_CAM_EDM_DRO] Re: Correct or Max voltage for Bridgeport Nema 42? + mo... studleylee 2002-02-11 20:09:28 UTC Re: Correct or Max voltage for Bridgeport Nema 42? + mo... Scot Rogers 2002-02-11 23:27:34 UTC bleed resistor Matthew King 2002-02-12 00:38:28 UTC Re: [CAD_CAM_EDM_DRO] Re: Correct or Max voltage for Bridgeport Nema 42? + mo... chewy8833 2002-02-12 05:43:11 UTC Re: bleed resistor studleylee 2002-02-12 06:01:12 UTC Re: Correct or Max voltage for Bridgeport Nema 42? + mo... Tony Jeffree 2002-02-12 08:58:38 UTC Re: bleed resistor Jon Elson 2002-02-12 11:03:47 UTC Re: [CAD_CAM_EDM_DRO] bleed resistor Scot Rogers 2002-02-12 11:57:32 UTC RE: [CAD_CAM_EDM_DRO] bleed resistor tonyjeffree 2002-02-12 19:58:04 UTC Re: bleed resistor Jon Elson 2002-02-12 22:44:46 UTC Re: [CAD_CAM_EDM_DRO] bleed resistor studleylee 2002-04-12 15:23:47 UTC SERIES BUCKING was Re: Correct or Max voltage for Bridgeport Nema 42 Alan Marconett KM6VV 2002-04-12 18:26:08 UTC Re: [CAD_CAM_EDM_DRO] SERIES BUCKING was Re: Correct or Max voltage for Bridgeport Nema 42