Re: [CAD_CAM_EDM_DRO] Power Supply Parts

Hi, no problem..i sent him the pictures. sounds like he might want to use
the already made one. cul brian f.

----- Original Message -----
From: "Carlos Guillermo" <carlos@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, February 14, 2002 8:33 PM
Subject: RE: [CAD_CAM_EDM_DRO] Power Supply Parts


> Sounds like the supply I just put together. I bought the x-former
> from Brian F on this list. I hope he doesn't mind, but you can
> contact him at ka1bbg@.... He mentioned he had
> rectifiers and appropriate caps too. Very good deal on the
> x-formers, rated at 49VAC (taps for 38 and 11) at 10A.
>
> HTH,
>
> Carlos Guillermo
> VERVE Engineering & Design
>
> -----Original Message-----
> From: rsgoldner [mailto:rgoldner@...]
> Sent: Thursday, February 14, 2002 6:37 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] Power Supply Parts
>
> Does anyone have either a power supply (about 60V at 10A), or some
> of the required parts to make one, available for sale? The most
> difficult part for me to find at a reasonable cost is the
> transformer (I think I need 36V-40V at 10A or more). I have read
> some posts that suggest a zener diode on the output of the supply
> is
> a good idea to prevent additional stepper generated voltage from
> exceeding the G201 specs. What size would the zener have to be? I
> can guess the voltage rating, about 75 volts. But, are these
> available in high wattages (do I need a high wattage)?
>
> Thanks!
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>