Re: Great deal on stepper motors!

I have been asked for more info on these motors. Here is all that I
have.

They are Minebea 34PM-C102-15 hybrid stepper motors. Here is a URL
for specs on a 34PM-C101 motor that I believe is almost identical.

http://www.nmb-europe.com/pdfs/rotary/RCS_34~1.PDF

The holding torque in this spec is 300 Ncm (about 424 oz/inch), but
I believe this may be in error. Here is a URL that also shows some
specs on the 34PM-C101, but it shows the torque at 196.1 Ncm (about
280 oz/inch).

http://www.ni.com/devzone/advisors/motion/mineaba.htm

--- In CAD_CAM_EDM_DRO@y..., "rsgoldner" <rgoldner@i...> wrote:
> There is a lot of 16 dual shaft, 280 oz/inch stepper motors
> available for $112 ($7 per motor!) plus shipping. I already have
> mine. I'm trying to help the group out by conveying this
information
> to someone who can use it.
>
> These motors are used and have what I consider to be a minor
> problem. Some of the wires coming out of the motor housing have
the
> insulation abraded so that the bare wire is showing. I feel that
> this is easily correctable with some shrink tubing or such.
>
> The company that has these motors was very nice to me and I am
only
> trying to help them and this group out. I have no monetary or
other
> interest in this.
>
> If you are interested, the first request to me via email (rgoldner
> AT iname.com) will get the info to purchase these. You must
purchase
> all 16 motors. Please do not ask for the info if you will not be
> taking advantage of this deal.