Re: [CAD_CAM_EDM_DRO] Re: Great deal on stepper motors!

I was going to suggest we get together and buy 'em as I could use a couple
of them. Oh well.

Cheers!

Paul R. Hvidston, N6MGN
ACKSYS Engineering
Upland, CA

----- Original Message -----
From: "rsgoldner" <rgoldner@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, February 25, 2002 2:38 PM
Subject: [CAD_CAM_EDM_DRO] Re: Great deal on stepper motors!


> The motors are gone.
>
> --- In CAD_CAM_EDM_DRO@y..., "rsgoldner" <rgoldner@i...> wrote:
> > I have been asked for more info on these motors. Here is all that
> I
> > have.
> >
> > They are Minebea 34PM-C102-15 hybrid stepper motors. Here is a URL
> > for specs on a 34PM-C101 motor that I believe is almost identical.
> >
> > http://www.nmb-europe.com/pdfs/rotary/RCS_34~1.PDF
> >
> > The holding torque in this spec is 300 Ncm (about 424 oz/inch),
> but
> > I believe this may be in error. Here is a URL that also shows some
> > specs on the 34PM-C101, but it shows the torque at 196.1 Ncm
> (about
> > 280 oz/inch).
> >
> > http://www.ni.com/devzone/advisors/motion/mineaba.htm
> >
> >
> > --- In CAD_CAM_EDM_DRO@y..., "rsgoldner" <rgoldner@i...> wrote:
> > > There is a lot of 16 dual shaft, 280 oz/inch stepper motors
> > > available for $112 ($7 per motor!) plus shipping. I already have
> > > mine. I'm trying to help the group out by conveying this
> > information
> > > to someone who can use it.
> > >
> > > These motors are used and have what I consider to be a minor
> > > problem. Some of the wires coming out of the motor housing have
> > the
> > > insulation abraded so that the bare wire is showing. I feel that
> > > this is easily correctable with some shrink tubing or such.
> > >
> > > The company that has these motors was very nice to me and I am
> > only
> > > trying to help them and this group out. I have no monetary or
> > other
> > > interest in this.
> > >
> > > If you are interested, the first request to me via email
> (rgoldner
> > > AT iname.com) will get the info to purchase these. You must
> > purchase
> > > all 16 motors. Please do not ask for the info if you will not be
> > > taking advantage of this deal.