Re: [CAD_CAM_EDM_DRO] Motion control board
Posted by
Jon Elson
on 2002-03-08 23:06:46 UTC
k8zre wrote:
for analog-input servo systems.
Well, I have sent the PC board out to be fabricated for my $200
4-axis step/direction with or without encoders board that connects
to the parallel port. This also has 16 digital inputs and 8 locations
on the board for solid state relays.
See http://pico-systems.com/univstep.html for more info.
Jon
> Ran across www.kupercontrols.com site with PCI bus card motionIt really isn't comparable to the Servo-to-Go card, as that is designed
> controller - reported to have 10 axes step and direction, 6
> quadrature inputs, etc. for $395.00 Add in 'Circuit Cellar' March
> 2002 issue. Wonder if anyone has seen or considered this as
> alternative to STG-II card??
for analog-input servo systems.
Well, I have sent the PC board out to be fabricated for my $200
4-axis step/direction with or without encoders board that connects
to the parallel port. This also has 16 digital inputs and 8 locations
on the board for solid state relays.
See http://pico-systems.com/univstep.html for more info.
Jon
Discussion Thread
k8zre
2002-03-08 20:20:08 UTC
Motion control board
k8zre
2002-03-08 20:24:23 UTC
Motion control board
k8zre
2002-03-08 20:24:23 UTC
Motion control board
Matt Shaver
2002-03-08 20:41:05 UTC
Re: [CAD_CAM_EDM_DRO] Motion control board
Jon Elson
2002-03-08 23:06:46 UTC
Re: [CAD_CAM_EDM_DRO] Motion control board
William Scalione
2002-03-09 05:36:24 UTC
Re: [CAD_CAM_EDM_DRO] Motion control board
Jon Elson
2002-03-09 22:57:45 UTC
Re: [CAD_CAM_EDM_DRO] Motion control board