Re: Mini work lights, cheap

Jon Anderson wrote:

> From: Jon Anderson <janders@...>
>
> WAnliker@... wrote:
>
> > I have used flexible conduit with several pieces of # 12 or 14
> > wire inside to hold the position the flex is bent to.
>
> I'm going to go to the hardware store tomorrow and see what I can put
> together. I tried to stuff the wiring and a length of 14ga copper
> through some 1/4" id nylon tubing, but couldn't quite manage it. Thanks.

After several abortive attempts at home made mounts and commercial
metal goose neck flexible mounts, I used loc-line coolant tubing, which
works VERY well. This is now on my mill, supporting a compact
fluorescent. I made 2 of them, and really like the way it works on my
machine. See what I did at :
http://ascc.artsci.wustl.edu/~jmelson/worklite.html

Jon