Re: capacitor
Posted by
mariss92705
on 2002-03-19 11:55:40 UTC
Jon,
Good points except for the cap size which is a bit of an over-kill. I
suggest using the following for sizing caps:
For 60Hz, C = (80,000 times I) / V
For 50Hz, C = (100,000 times I) / V
Where V is the power supply voltage, I is the maximum power supply
current and the answer, C, is in microfarads.
This scales the ripple voltage to about 10% of the output voltage and
keeps the power factor reasonable.
For 10A @ 80VDC, this yeilds 10,000 uF at 60Hz.
Mariss
--- In CAD_CAM_EDM_DRO@y..., Jon Elson <elson@p...>
You need to double the value of each
Good points except for the cap size which is a bit of an over-kill. I
suggest using the following for sizing caps:
For 60Hz, C = (80,000 times I) / V
For 50Hz, C = (100,000 times I) / V
Where V is the power supply voltage, I is the maximum power supply
current and the answer, C, is in microfarads.
This scales the ripple voltage to about 10% of the output voltage and
keeps the power factor reasonable.
For 10A @ 80VDC, this yeilds 10,000 uF at 60Hz.
Mariss
--- In CAD_CAM_EDM_DRO@y..., Jon Elson <elson@p...>
You need to double the value of each
> cap when in series, so to get 100,000 uF at 80 V, use 2 200,000 uF
> 40 V caps. Since the voltage balance is not perfect, stay down at
> 70 V or find 50 V caps.
>
> Jon
Discussion Thread
Mike Snodgrass
2002-03-19 07:00:36 UTC
capacitor
mariss92705
2002-03-19 07:18:14 UTC
Re: capacitor
Mike Snodgrass
2002-03-19 08:01:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: capacitor
Jon Elson
2002-03-19 09:46:34 UTC
Re: [CAD_CAM_EDM_DRO] Re: capacitor
Jon Elson
2002-03-19 10:15:06 UTC
Re: [CAD_CAM_EDM_DRO] capacitor
Mike Snodgrass
2002-03-19 10:39:05 UTC
Re: [CAD_CAM_EDM_DRO] capacitor
mariss92705
2002-03-19 11:55:40 UTC
Re: capacitor
Stan Stocker
2002-03-19 18:56:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: capacitor
gnrshelton
2002-03-19 19:24:18 UTC
Re: capacitor
Jon Elson
2002-03-19 21:25:53 UTC
Re: [CAD_CAM_EDM_DRO] Re: capacitor
Les Watts
2002-03-20 07:09:28 UTC
Re: [CAD_CAM_EDM_DRO] Re: capacitor
Marcus & Eva
2002-03-20 08:15:40 UTC
Re: [CAD_CAM_EDM_DRO] Re: capacitor
Paul R. Hvidston
2002-03-20 08:18:44 UTC
Re: [CAD_CAM_EDM_DRO] capacitor
mariss92705
2002-03-20 08:32:17 UTC
Re: capacitor
Mike Snodgrass
2002-03-20 08:47:14 UTC
Re: [CAD_CAM_EDM_DRO] capacitor
Jon Elson
2002-03-20 10:19:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: capacitor
Les Watts
2002-03-20 11:16:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: capacitor
mariss92705
2002-03-20 12:34:44 UTC
Re: capacitor
mariss92705
2002-03-20 14:08:07 UTC
Re: capacitor
Jon Elson
2002-03-20 22:18:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: capacitor
mariss92705
2002-03-20 23:17:42 UTC
Re: capacitor
Les Watts
2002-03-21 08:50:26 UTC
Re: [CAD_CAM_EDM_DRO] Re: capacitor
Jon Elson
2002-03-21 10:01:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: capacitor
Jon Elson
2002-03-21 10:13:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: capacitor
Les Watts
2002-03-21 10:35:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: capacitor
mariss92705
2002-03-21 12:31:33 UTC
Re: capacitor
Les Watts
2002-03-21 13:52:59 UTC
Re: [CAD_CAM_EDM_DRO] Re: capacitor
Tim Goldstein
2002-03-21 13:59:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: capacitor
Les Newell
2002-03-21 14:35:41 UTC
Re: [CAD_CAM_EDM_DRO] Re: capacitor
Jon Elson
2002-03-21 22:39:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: capacitor