Re: Capacitor hunting

Darn,

I went through the Digi-key, Mouser and Jameco books to find one, but
all I found was low voltage ones.

I guess I'll go back and FIND it this time !

Thanks, sometimes I miss the obvious, but at least I know I can hit
the side of a barn, (when standing inside)

Dave

--- In CAD_CAM_EDM_DRO@y..., "Dan Mauch" <dmauch@s...> wrote:
> If you need a large electrolytic you can get 100V 15000 UF from
> www.mouser.com
> Dan
>
> -----Original Message-----
> From: JanRwl@A... [mailto:JanRwl@A...]
> Sent: Monday, April 01, 2002 7:22 PM
> To: CAD_CAM_EDM_DRO@y...
> Subject: Re: [CAD_CAM_EDM_DRO] Capacitor hunting
>
> In a message dated 01-Apr-02 11:16:37 Central Standard Time,
> davemucha@j... writes:
>
>
> > I was figuring a 10,000 uF at 100 VDC but the places near me
don't
> > carry these values.
>
> Dave, ever consider TWO 4700 uF/100 WV, or 9500 uF or 12,000 uF, or
120
> WV???
>
> THREE 3300 uF? Jan Rowland
>
>
> [Non-text portions of this message have been removed]
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
> sister site to the CCED group, as many of the same memembers are
there,
> for OT subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@y...
> Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> Moderator: jmelson@a... timg@k... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/