Re: [CAD_CAM_EDM_DRO] Re: Capacitor hunting

Here is what I found at Mouser.com

Stock No.: 539-CGS100V15000
Description: MALLORY COMPUTER GRADE ELECTROLYTIC CAPACITORS LYTIC 100V
15000uF
Manufacturer's Part No.: CGS153U100X4C

$30

Bert

----- Original Message -----
From: "dave_ace_me" <davemucha@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, April 02, 2002 10:16 AM
Subject: [CAD_CAM_EDM_DRO] Re: Capacitor hunting


> Darn,
>
> I went through the Digi-key, Mouser and Jameco books to find one, but
> all I found was low voltage ones.
>
> I guess I'll go back and FIND it this time !
>
> Thanks, sometimes I miss the obvious, but at least I know I can hit
> the side of a barn, (when standing inside)
>
> Dave
>
>
>
> --- In CAD_CAM_EDM_DRO@y..., "Dan Mauch" <dmauch@s...> wrote:
> > If you need a large electrolytic you can get 100V 15000 UF from
> > www.mouser.com
> > Dan
> >
> > -----Original Message-----
> > From: JanRwl@A... [mailto:JanRwl@A...]
> > Sent: Monday, April 01, 2002 7:22 PM
> > To: CAD_CAM_EDM_DRO@y...
> > Subject: Re: [CAD_CAM_EDM_DRO] Capacitor hunting
> >
> > In a message dated 01-Apr-02 11:16:37 Central Standard Time,
> > davemucha@j... writes:
> >
> >
> > > I was figuring a 10,000 uF at 100 VDC but the places near me
> don't
> > > carry these values.
> >
> > Dave, ever consider TWO 4700 uF/100 WV, or 9500 uF or 12,000 uF, or
> 120
> > WV???
> >
> > THREE 3300 uF? Jan Rowland
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com to
> reach it
> > if you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this as a
> > sister site to the CCED group, as many of the same memembers are
> there,
> > for OT subjects, that are not allowed on the CCED list.
> >
> >
> >
> > Post messages: CAD_CAM_EDM_DRO@y...
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> > List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> > Moderator: jmelson@a... timg@k... [Moderator]
> > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same memembers are there, for
OT subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>