Re: 2 Axis Motion at Last, Plasma machine
Posted by
morgtod
on 2002-04-03 13:47:50 UTC
Hi -
I just dropped in on this thread, but it sounds like something I
just ran into. I switched computers on my plasma table and all of a
sudden none of the toggles would work, turns out the new computer
couldn't drive the electronic relays, so I added a 7404 and double
inverted on it to buffer and now it works. what seemed strange is
that the software wouldn't even show the spinde or coolant as being
on. ( I'm using master5 )
Good luck
Todd
--- In CAD_CAM_EDM_DRO@y..., "Toddy, Terry L CUBA" <tltoddy@o...>
wrote:
I just dropped in on this thread, but it sounds like something I
just ran into. I switched computers on my plasma table and all of a
sudden none of the toggles would work, turns out the new computer
couldn't drive the electronic relays, so I added a 7404 and double
inverted on it to buffer and now it works. what seemed strange is
that the software wouldn't even show the spinde or coolant as being
on. ( I'm using master5 )
Good luck
Todd
--- In CAD_CAM_EDM_DRO@y..., "Toddy, Terry L CUBA" <tltoddy@o...>
wrote:
> >> The screen display does show the spindle running. I got the partabout
> >> specifying an S word to go with the M03.don't.
>
> >Hmm, well, I don't know why estop would work, but the spindle bits
> >Are you sure you are looking at the right pins? It should be pin3 for
> >forward and pin 2 for reverse.only
>
> >Jon
>
>
> Jon,
> Yes, I'm looking at all the bits with the tcl program IO_Show. The
> thing that toggles is the e-stop bit.
>
> Terry
Discussion Thread
Toddy, Terry L CUBA
2002-04-02 11:12:56 UTC
2 Axis Motion at Last, Plasma machine
Jon Elson
2002-04-02 21:55:06 UTC
Re: [CAD_CAM_EDM_DRO] 2 Axis Motion at Last, Plasma machine
ajv2803959
2002-04-03 01:24:14 UTC
Re: 2 Axis Motion at Last, Plasma machine ???¿¿¿ Its possible ???
Toddy, Terry L CUBA
2002-04-03 05:33:39 UTC
RE: [CAD_CAM_EDM_DRO] 2 Axis Motion at Last, Plasma machine
Jon Elson
2002-04-03 10:45:16 UTC
Re: [CAD_CAM_EDM_DRO] 2 Axis Motion at Last, Plasma machine
Toddy, Terry L CUBA
2002-04-03 10:50:16 UTC
RE: [CAD_CAM_EDM_DRO] 2 Axis Motion at Last, Plasma machine
morgtod
2002-04-03 13:47:50 UTC
Re: 2 Axis Motion at Last, Plasma machine