Re: Best/Easiest software for 4 Axis CNC Taig Mill?
Posted by
follicely_challenged
on 2002-04-15 13:22:18 UTC
MoJord77,
Dolphin Partmaster CadCam, I saw a Taig mill being demonstrated at an
exhibition recently, and it was machining a turbine that had been
programmed on the Dolphin system.
I believe that there is a discount offered for hobby members of this
list.
I believe you can get it through Bill Griffin at Grifftek (US)
www.grifftek.com or try http://www.dolphin-systems.co.uk/
I have used the software for several years now, if you have any
questions I will be happy to answer them.
Dave Pearson
Dolphin Partmaster CadCam, I saw a Taig mill being demonstrated at an
exhibition recently, and it was machining a turbine that had been
programmed on the Dolphin system.
I believe that there is a discount offered for hobby members of this
list.
I believe you can get it through Bill Griffin at Grifftek (US)
www.grifftek.com or try http://www.dolphin-systems.co.uk/
I have used the software for several years now, if you have any
questions I will be happy to answer them.
Dave Pearson
--- In CAD_CAM_EDM_DRO@y..., "mojord77" <mojord77@y...> wrote:
> Hello everyone. I am getting a 4 axis Taig CNC mill and need to
know
> what the easiest to use software for it is. I have had experiece
with
> CAD programs, but am a complete novice at G Codes/Milling software.
I
> will primarily be using this mill to make miniature jet engines and
> need it for the turbines or compressor blades. Please forgive me if
I
> double post this as I never saw the first message get posted.
>
> Thanks,
>
> MoJord77
Discussion Thread
mojord77
2002-04-15 09:23:18 UTC
Best/Easiest software for 4 Axis CNC Taig Mill?
follicely_challenged
2002-04-15 13:22:18 UTC
Re: Best/Easiest software for 4 Axis CNC Taig Mill?
mojord77
2002-04-15 15:01:14 UTC
Re: Best/Easiest software for 4 Axis CNC Taig Mill?
Tim Goldstein
2002-04-15 15:46:20 UTC
Re: [CAD_CAM_EDM_DRO] Re: Best/Easiest software for 4 Axis CNC Taig Mill?
stevenson_engineers
2002-04-15 17:35:41 UTC
Re: Best/Easiest software for 4 Axis CNC Taig Mill?
follicely_challenged
2002-04-17 04:07:25 UTC
Re: Best/Easiest software for 4 Axis CNC Taig Mill?
stevenson_engineers
2002-04-17 05:39:49 UTC
Re: Best/Easiest software for 4 Axis CNC Taig Mill?
follicely_challenged
2002-04-17 10:09:31 UTC
Re: Best/Easiest software for 4 Axis CNC Taig Mill?
ballendo
2002-04-19 07:58:08 UTC
Dolphin IS cad/CAM was Re: Best/Easiest software for 4 Axis CNC Taig Mill?