Re: Best/Easiest software for 4 Axis CNC Taig Mill?

--- In CAD_CAM_EDM_DRO@y..., "mojord77" <mojord77@y...> wrote:

> Thanks Dave...
> Can you tell me about the ease of use of the program? On the links
> you provided it says its one of the easiest to use. IS this true?
> Could you share with me some of your experiences.
> Thanks!

I also use Dolphin and find it to be very easy.
For a start it has an unclutted screen. You don't have to draw any
offset paths the program does it all for you. Same for the lead in
and lead out, all done automatically.
It's biggest feature though is the edit feature. You process the file
as you want to cut it and then generate the G code when you are happy
with it.
Below are three links that will take you to screen shots of actual
part processed in Dolphin.

http://homepage.ntlworld.com/machines/goround.txt
http://homepage.ntlworld.com/machines/offset.txt
http://homepage.ntlworld.com/machines/area%20clear.txt

Have a look at these and then ask some more questions. If you have an
actual part send me the file off list, machines at ntlworld.com and
I'll process it and send you the screen shots back.

John S.