Re: Bidgeport Series 1 Retrofit

I have retrofitted several Bridgeports myself and have helped many others. I
have used the Bridgeport drivers and I have replaced them with Microkinetics
8010 drivers. I am working on an interface to the Bridgeport drivers for
EMC.
The Bridgeport BOSS 3 through BOSS 6 CNC machines are just begging for a
retrofit.
Darrell
http://machinemaster.com

----- Original Message -----
From: Mike keller <legmaker@...>
To: <CAD_CAM_EDM_DRO@onelist.com>
Sent: Saturday, December 25, 1999 1:21 PM
Subject: [CAD_CAM_EDM_DRO] Bidgeport Series 1 Retrofit


> From: "Mike keller" <legmaker@...>
>
> Has anyone ever converted or retrofitted a Bridgeport Series 1? I just
got
> one and am looking for input..
> Thanks in Advance
>
> > Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems in the above catagories.
> To Unsubscribe, read archives, change to or from digest.
> Go to: http://www.onelist.com/isregistered.cgi
> Log on, and you will go to Member Center, and you can make changes there.
> For the FAQ, go to http://www.ktmarketing.com/faq.html
> bill,
> List Manager
>