CAD CAM EDM DRO - Yahoo Group Archive

Re: 3 phase, and more.

on 1999-12-27 07:48:49 UTC
Date: Sun, 26 Dec 1999 15:05:18 +0100
From: "Arne Chr.Jorgensen" <instel@...>
Subject:
Date: Sun, 26 Dec 1999 15:05:18 +0100
From: "Arne Chr.Jorgensen" <instel@...>
Subject: 3 phase, and more.

Hi all,

snip

First a note on dates: DOS will read the BIOS, date and this
starts at 1980.

Re: DOS & Windows

First - look for clock chip - YES? Read date/time
NO? Use default date/time
Default _usually_ "1/1/1980 / 00:00:00"

The Bios date is not used for anything during 'booting'.

After this point, when the system gets to executing the 'programmed'
part of the startup routine, any 'programmed (batch file commands)' can
reset the date and/or time, to whatever.

Linux = Check your documentation.

Chuck D.
--
-----------------------------------------------------------
He, who will not reason, is a bigot; William Drumond,
he, who cannot, is a fool; Scottish writer
and he, who dares not, is a slave. (1585-1649)
While he that does, is a free man! Joseph P. 1955-
-----------------------------------------------------------
Chuck Davis / Sutherlin Industries FAX # (804) 799-0940
1973 Reeves Mill Road E-Mail -- cad@...
Sutherlin, Virginia 24594-3819 Voice # (804) 799-5803

Discussion Thread

Arne Chr.Jorgensen 1999-12-26 06:05:18 UTC 3 phase, and more. Steve Carlisle 1999-12-26 10:06:18 UTC Re: 3 phase, and more. Darrell 1999-12-26 23:44:30 UTC Re: 3 phase, and more. Charles A Davis 1999-12-27 07:48:49 UTC Re: 3 phase, and more.