Re: [CAD_CAM_EDM_DRO] EMC GUI

armartinus

Take a look at this and you will see it is not at all like the DOS version
http://www.linuxcnc.org/handbook/part3/images/tkstock.JPG

This page will give you some info on EMC
http://www.linuxcnc.org

Bill

> Hi all.
>
> I have been reading for a few days on your site and am interested in
> EMC but before i go through the task i would like to know how it
> works. I went to the Deskam site and down loaded their dos version of
> it but did not like the fact that i had to type in comands .To jog
> the thing first i would have to type jog then use a key like [u] for
> the up direction.Please tell me that EMC does not work in this
> fashion.Also if i could get one axis to follow another like A follows
> the X axis but in reverse in EMC.
>
> thank you in advance for your insights.
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:

aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.

> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a

sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>