CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: OT Transistors

Posted by Stan Stocker
on 2002-05-04 18:50:09 UTC
Hi John;

With the flat facing you, and the leads pointed down, the pins are (from
left to right) E-B-C for a 2N3904, just as you describe. The 2N3904 is
one of the very common NPN small signal/switching transistors, perhaps
only slightly less have been used than the 2N2222. The 2N3906 is the
PNP brother/sister of the 2N3904.

Poor ASCII art below:

_______
| |
|2N3904|
| |
| E B C|
--------
| | |

Good luck,
Stan

John wrote:
>
> > What is the name/number of the transistor? Once you give me the
> > transistor part, I can respond quickly.
> >
> > Mac
>
> The transistor has this written on it: -
> 2N3904
> M938
>
> I've read this is arranged as an NPN silicon transistor.
>
> Thanks for the help guys,
> John
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Discussion Thread

John 2002-05-04 10:56:50 UTC OT Transistors macfool68 2002-05-04 11:27:28 UTC Re: OT Transistors John 2002-05-04 11:37:27 UTC Re: [CAD_CAM_EDM_DRO] Re: OT Transistors macfool68 2002-05-04 11:41:13 UTC Re: OT Transistors John 2002-05-04 11:55:51 UTC Re: [CAD_CAM_EDM_DRO] Re: OT Transistors macfool68 2002-05-04 12:05:43 UTC Re: OT Transistors JanRwl@A... 2002-05-04 13:55:52 UTC Re: [CAD_CAM_EDM_DRO] OT Transistors JanRwl@A... 2002-05-04 14:07:43 UTC Re: [CAD_CAM_EDM_DRO] Re: OT Transistors Stan Stocker 2002-05-04 18:50:09 UTC Re: [CAD_CAM_EDM_DRO] Re: OT Transistors Jon Elson 2002-05-04 22:40:43 UTC Re: [CAD_CAM_EDM_DRO] OT Transistors Jon Elson 2002-05-04 22:43:15 UTC Re: [CAD_CAM_EDM_DRO] Re: OT Transistors