CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Knee or Quill Drive?

Posted by aaalfano
on 2002-05-11 09:20:38 UTC
Hi all,
I guess the best answer that I can come up with is it is lot easier to
convert the knee then the quill. It is not that you have to drill 5" holes,
etc. I'm in the same
position, in trying to convert my Bridgeport for the Z-Axis.
Check out web site www.cncauto.com They are in Amherst, New Hampshire,
they milling
machine "System M3X-#C". They are saying +/- .0005 positioning accuracy over
the saddle.
There Z-Axis using the knee. I E-Mailed them, & they told me that they use
spiral bevel gears
not the straight bevel gears on the Knee that Bridgeport installs. I could
not find the spiral bevel
gears.
Al Alfano


> Does sound like a lot but if you want to drill a hole in a 5' thick part
> with a 5 or 6" tall vise, then you need 5 for the bit, 5 for the part
> and 5 for the vise. Not a lot left for the chuck or holder.
>
> John wrote:
> >
> > I suppose this will sound stupid but what on Earth are you guys milling
> > that's 16" tall in your garage? :)
> >
> > John H.
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
> >
> > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Discussion Thread

bwrfromuk 2002-05-10 00:34:17 UTC Knee or Quill Drive? Peter 2002-05-10 06:54:56 UTC Re: [CAD_CAM_EDM_DRO] Knee or Quill Drive? Dan Mauch 2002-05-10 07:14:56 UTC RE: [CAD_CAM_EDM_DRO] Knee or Quill Drive? Tim Goldstein 2002-05-10 08:30:35 UTC Re: [CAD_CAM_EDM_DRO] Knee or Quill Drive? Jon Elson 2002-05-10 19:28:39 UTC Re: [CAD_CAM_EDM_DRO] Knee or Quill Drive? Bill Darby 2002-05-10 20:18:07 UTC Re: [CAD_CAM_EDM_DRO] Knee or Quill Drive? Jon Elson 2002-05-10 23:05:39 UTC Re: [CAD_CAM_EDM_DRO] Knee or Quill Drive? bwrfromuk 2002-05-11 01:41:52 UTC Re: Knee or Quill Drive? Bill Darby 2002-05-11 04:42:29 UTC Re: [CAD_CAM_EDM_DRO] Knee or Quill Drive? John 2002-05-11 07:52:39 UTC Re: [CAD_CAM_EDM_DRO] Knee or Quill Drive? Bill Darby 2002-05-11 08:12:57 UTC Re: [CAD_CAM_EDM_DRO] Knee or Quill Drive? vrsculptor 2002-05-11 08:22:30 UTC Re: Knee or Quill Drive? Knee wear. turbulatordude 2002-05-11 08:40:11 UTC Re: Knee or Quill Drive? aaalfano 2002-05-11 09:20:38 UTC Re: [CAD_CAM_EDM_DRO] Knee or Quill Drive? Jon Elson 2002-05-11 21:39:30 UTC Re: [CAD_CAM_EDM_DRO] Re: Knee or Quill Drive? Keith Rumley 2002-05-14 06:31:50 UTC [CAD_CAM_EDM_DRO] Re: Knee or Quill Drive?