Re: [CAD_CAM_EDM_DRO] BDI Again
Posted by
Jon Elson
on 2002-05-24 22:17:42 UTC
Gene wrote:
stuff (x-windows, Linux, the EMC GUI, etc.) You need to reduce the
real-time load on the system, unless motor performance is so
marginal that you can't allow it to get any worse. If using freqmod,
change the PERIOD parameter in the .ini file to a larger value (slowing
down the RT section). If using steppermod, then the CYCLE_TIME
parameter in each axis section should be made larger.
Jon
> Well I reinstalled the BDI and everything is working again but the mouseit's not the mouse, it is how much time is left over for the non-real time
> seems sluggish and blinks on and off ,very annoying. Is there a place to
> adjust mouse settings?
stuff (x-windows, Linux, the EMC GUI, etc.) You need to reduce the
real-time load on the system, unless motor performance is so
marginal that you can't allow it to get any worse. If using freqmod,
change the PERIOD parameter in the .ini file to a larger value (slowing
down the RT section). If using steppermod, then the CYCLE_TIME
parameter in each axis section should be made larger.
Jon
Discussion Thread
Gene
2002-05-24 19:16:16 UTC
BDI Again
William Scalione
2002-05-24 20:24:50 UTC
Re: [CAD_CAM_EDM_DRO] BDI Again
Gene
2002-05-24 21:01:25 UTC
Re: [CAD_CAM_EDM_DRO] BDI Again
William Scalione
2002-05-24 21:27:56 UTC
Re: [CAD_CAM_EDM_DRO] BDI Again
Gene
2002-05-24 22:03:38 UTC
Re: [CAD_CAM_EDM_DRO] BDI Again
reed_irion
2002-05-24 22:06:31 UTC
Re: BDI Again
Jon Elson
2002-05-24 22:17:42 UTC
Re: [CAD_CAM_EDM_DRO] BDI Again