CAD CAM EDM DRO - Yahoo Group Archive

Re: Gecko 201

on 2002-05-31 01:33:33 UTC
--- In CAD_CAM_EDM_DRO@y..., wanliker@a... wrote:
> In a message dated 5/30/2002 7:47:43 PM Mountain Daylight Time,
> Zeketurner@a... writes:
> > Anyone lapping the 201's for fit to a heatsink ? I have made some
> > sinks out of 6061 that should be ok.
> >
>
> I have the G320's, and I draw filed gently the bottoms, so that all
>burrs and
> screws were flat, and then mounted them on the heat sinks that came
>with some
> computer cooling fans.
> bill
>
Bill,
I have been doing this since they first came out. It's a good idea
you get a heat sink and fan for under $10
See:-
http://homepage.ntlworld.com/machines/heatsink.jpg

John S.

Discussion Thread

wfturner2000 2002-05-30 18:45:35 UTC Gecko 201 wanliker@a... 2002-05-30 19:13:40 UTC Re: [CAD_CAM_EDM_DRO] Gecko 201 JanRwl@A... 2002-05-30 20:35:02 UTC Re: [CAD_CAM_EDM_DRO] Gecko 201 stevenson_engineers 2002-05-31 01:33:33 UTC Re: Gecko 201 wanliker@a... 2002-05-31 07:16:53 UTC Re: [CAD_CAM_EDM_DRO] Gecko 201