RE: [CAD_CAM_EDM_DRO] +5V geckodrive 201

Hugo,

Some recommend that you use the 5 volts from your PC. The break-out board
that I use has a built in 5 volt supply.

If you build your own 5 volt supply make sure that the ground is connected
to the ground pins (Parallel port db 25) for the PC.

Bob

-----Original Message-----
From: hugo_cnc [mailto:Hwatering@...]
Sent: Sunday, June 02, 2002 2:56 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] +5V geckodrive 201


Hi all,

Just a quick questions the +5 V on the geckodrive next to the step
and direction signal, can I use a +5V line out of a power supply or
should it come out of my PC?
Thanks

Hugo



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister
site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.



Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Mom
List Owner



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/