Re: EMC error
Posted by
imserv1
on 2002-06-05 07:15:10 UTC
--- In CAD_CAM_EDM_DRO@y..., "Raymond Heckert" <jnr@a...> wrote:
Reed needs to put some approach and departs in his cutting strategy
to properly turn cutter comp on and off with a G01, off the work
piece finished walls. While he is learning it would also be useful
if he turned modal G codes off so that he sees the G00 and G01 on
each line and how they interact with the switching on and off of the
cutter comp.
Best Regards,
Fred Smith
IMService
> are you using a demo copy of VECTOR? Word has it that some demoThe Vector demo is a full working version for 30 days.
> programs only run a few lines, then stop.
Reed needs to put some approach and departs in his cutting strategy
to properly turn cutter comp on and off with a G01, off the work
piece finished walls. While he is learning it would also be useful
if he turned modal G codes off so that he sees the G00 and G01 on
each line and how they interact with the switching on and off of the
cutter comp.
Best Regards,
Fred Smith
IMService
Discussion Thread
reed_irion
2002-06-03 18:00:26 UTC
EMC error
Jon Elson
2002-06-03 21:25:03 UTC
Re: [CAD_CAM_EDM_DRO] EMC error
Raymond Heckert
2002-06-04 14:42:51 UTC
Re: [CAD_CAM_EDM_DRO] EMC error
imserv1
2002-06-05 07:15:10 UTC
Re: EMC error
reed_irion
2002-06-05 20:03:27 UTC
Re: EMC error
reed_irion
2002-06-05 20:07:33 UTC
Re: EMC error
Jon Elson
2002-06-05 22:14:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: EMC error