Re: EMC error
Posted by
reed_irion
on 2002-06-05 20:07:33 UTC
Thanks Fred. Reed is hitting the books on this now, instead of
clunking around in the dark.
As Reed had mentioned the desired end result is a more or less global
feedrate with no hand editing of the G-code files.
In order to do this efficiently I guess there is no choice but to
learn how to use the macros in VectorCAM?
Reed
clunking around in the dark.
As Reed had mentioned the desired end result is a more or less global
feedrate with no hand editing of the G-code files.
In order to do this efficiently I guess there is no choice but to
learn how to use the macros in VectorCAM?
Reed
--- In CAD_CAM_EDM_DRO@y..., "imserv1" <imserv@v...> wrote:
> --- In CAD_CAM_EDM_DRO@y..., "Raymond Heckert" <jnr@a...> wrote:
>
> > are you using a demo copy of VECTOR? Word has it that some demo
> > programs only run a few lines, then stop.
>
> The Vector demo is a full working version for 30 days.
>
> Reed needs to put some approach and departs in his cutting strategy
> to properly turn cutter comp on and off with a G01, off the work
> piece finished walls. While he is learning it would also be useful
> if he turned modal G codes off so that he sees the G00 and G01 on
> each line and how they interact with the switching on and off of
the
> cutter comp.
>
> Best Regards,
>
> Fred Smith
> IMService
Discussion Thread
reed_irion
2002-06-03 18:00:26 UTC
EMC error
Jon Elson
2002-06-03 21:25:03 UTC
Re: [CAD_CAM_EDM_DRO] EMC error
Raymond Heckert
2002-06-04 14:42:51 UTC
Re: [CAD_CAM_EDM_DRO] EMC error
imserv1
2002-06-05 07:15:10 UTC
Re: EMC error
reed_irion
2002-06-05 20:03:27 UTC
Re: EMC error
reed_irion
2002-06-05 20:07:33 UTC
Re: EMC error
Jon Elson
2002-06-05 22:14:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: EMC error