Re: [CAD_CAM_EDM_DRO] Need a program to download files from Lathe
Posted by
hllrsr@c...
on 2002-06-09 20:35:05 UTC
Scott,
try this one, I use it at work with a custom wired cable from the rs232
port to the serial port on the computer.
http://www.mudcentral.com/downloads/
Look for Telix v1.1 or higher.
HTH
Iain
fuddham@... wrote:
try this one, I use it at work with a custom wired cable from the rs232
port to the serial port on the computer.
http://www.mudcentral.com/downloads/
Look for Telix v1.1 or higher.
HTH
Iain
fuddham@... wrote:
>
> Actually, this machine does have a tailstock. the bed length is short and it
> have a 12 tool turret. Still looking for a program.
>
> Thanks
>
> Scott
>
Discussion Thread
fuddham
2002-06-08 16:15:41 UTC
Need a program to download files from Lathe
John
2002-06-08 17:15:37 UTC
Re: [CAD_CAM_EDM_DRO] Need a program to download files from Lathe
JanRwl@A...
2002-06-08 19:44:23 UTC
Re: [CAD_CAM_EDM_DRO] Need a program to download files from Lathe
Michael Milligan
2002-06-08 20:01:59 UTC
RE: [CAD_CAM_EDM_DRO] Need a program to download files from Lathe
doug98105
2002-06-08 20:38:16 UTC
Re: Need a program to download files from Lathe
JanRwl@A...
2002-06-08 20:53:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: Need a program to download files from Lathe
fuddham@a...
2002-06-09 15:30:47 UTC
Re: [CAD_CAM_EDM_DRO] Need a program to download files from Lathe
imserv1
2002-06-09 19:21:50 UTC
Re: Need a program to download files from Lathe
hllrsr@c...
2002-06-09 20:35:05 UTC
Re: [CAD_CAM_EDM_DRO] Need a program to download files from Lathe
Dan Mauch
2002-06-10 06:26:14 UTC
RE: [CAD_CAM_EDM_DRO] Need a program to download files from Lathe