CAD CAM EDM DRO - Yahoo Group Archive

Re: vexta steppers

Posted by mariss92705
on 2002-06-11 22:39:11 UTC
Hi,

Sanyo Denki motors are inexpensive (<$100) and are among the best
motors I have ever tested, particularly the 103 series. The 2 amp
version eaisily spins up to over 6,000 RPM no-load and outputs 100W
at 60VDC. They are also exceptionally linear, making them excellent
microstepping candidates. I measured the ratio between the smallest
microstep to the biggest at 1:1.1, meaning the motor linearity is
about 1%. My 2 cent's worth.

Mariss

--- In CAD_CAM_EDM_DRO@y..., "markpowerplus" <mabw@b...> wrote:
> Morning all,
> Does anyone know a good place to buy Vexta stepper motors from?
Like
> some where reasonable priced (read cheap)!
> thanks
> Mark

Discussion Thread

markpowerplus 2002-06-11 14:44:02 UTC vexta steppers JanRwl@A... 2002-06-11 16:26:14 UTC Re: [CAD_CAM_EDM_DRO] vexta steppers markpowerplus 2002-06-11 17:28:48 UTC Re: vexta steppers bsptrades 2002-06-11 18:53:50 UTC Re: vexta steppers mariss92705 2002-06-11 22:39:11 UTC Re: vexta steppers KenMa 2002-06-12 10:00:35 UTC Re: vexta steppers mariss92705 2002-06-12 11:12:53 UTC Re: vexta steppers paul_alz 2002-06-12 11:31:01 UTC Re: vexta steppers gwtech_yh 2002-06-12 11:42:40 UTC Re: vexta steppers paul_alz 2002-06-12 14:12:49 UTC Re: vexta steppers KenMa 2002-06-13 15:15:32 UTC Re: vexta steppers