Re: found emc ragidness problem

--- In CAD_CAM_EDM_DRO@y..., "armartinus" <armartin@t...> wrote:

> first thank you jon elson and wiiliam scalione.
> your sugestion were great . now i have tried the bdi on 4 seperate
> computers and no go. it seems on my set up that steppermod works

alot

> better than freqmod. dont ask me why because i really do not know.
> all the computers that i tried where amd's so i guess i got to try
> the pentium class next.one question does emc talk well with the
> gecko's 201, or do i have to modify.i tried different plugs, changed
> the usb to disable and changed printer port to ecp that seemed to

help

> put steppermod seems to run better than freqmod.if you have it
> running really well could you tell me which mother board you are

using

> for emc.
> thank you guy's
> richard
>
>
> --- In CAD_CAM_EDM_DRO@y..., Jon Elson <elson@p...> wrote:
> > armartinus wrote:
> >
> > > I have one computer 300 mhz. that i have cncpro on and working
> fine,
> > > tried installing the bdi on that one but would not take. So i
> > > installed it on a 500 mhz machine and installed just fine,
> connected

What is your steps per inch ?