Re: found emc ragidness problem

i'm running at 2000 steps per inch
thanks for your help
richard

--- In CAD_CAM_EDM_DRO@y..., "dakota8833" <dakota8833@b...> wrote:
> --- In CAD_CAM_EDM_DRO@y..., "armartinus" <armartin@t...> wrote:
> > first thank you jon elson and wiiliam scalione.
> > your sugestion were great . now i have tried the bdi on 4 seperate
> > computers and no go. it seems on my set up that steppermod works
> alot
> > better than freqmod. dont ask me why because i really do not know.
> > all the computers that i tried where amd's so i guess i got to
try
> > the pentium class next.one question does emc talk well with the
> > gecko's 201, or do i have to modify.i tried different plugs,
changed
> > the usb to disable and changed printer port to ecp that seemed to
> help
> > put steppermod seems to run better than freqmod.if you have it
> > running really well could you tell me which mother board you are
> using
> > for emc.
> > thank you guy's
> > richard
> >
> >
> > --- In CAD_CAM_EDM_DRO@y..., Jon Elson <elson@p...> wrote:
> > > armartinus wrote:
> > >
> > > > I have one computer 300 mhz. that i have cncpro on and
working
> > fine,
> > > > tried installing the bdi on that one but would not take. So i
> > > > installed it on a 500 mhz machine and installed just fine,
> > connected
>
>
> What is your steps per inch ?