Re: Mariss' power supply circuit
Posted by
bsptrades
on 2002-06-20 11:07:37 UTC
Why not build the supply shunt as a module that can attach to the
driver power input directly. Often you need a cap at the driver
anyhow. It would seem convenient to package a decent filter
capacitor, the shunt logic, and any sense circuits on a small board
that could fix to the drive. This way the shunt is close to the
source , you can add a spike suppression path as well. Now the system
scales well with the machine setup i.e. more drives, more shunts for
a larger main supply?
driver power input directly. Often you need a cap at the driver
anyhow. It would seem convenient to package a decent filter
capacitor, the shunt logic, and any sense circuits on a small board
that could fix to the drive. This way the shunt is close to the
source , you can add a spike suppression path as well. Now the system
scales well with the machine setup i.e. more drives, more shunts for
a larger main supply?
--- In CAD_CAM_EDM_DRO@y..., "mariss92705" <mariss92705@y...> wrote:
>
> If anyone is interested, I can write up a short "primer" that
> explains why the numbers mentioned are so.
>
> Mariss
>
Is it done yet?? HUH HUH , more free info coool..
Brian S Punkar
BSP
Discussion Thread
Les Watts
2002-06-17 15:31:32 UTC
Mariss' power supply circuit
Erie Patsellis
2002-06-17 16:48:54 UTC
Re: [CAD_CAM_EDM_DRO] Mariss' power supply circuit
mariss92705
2002-06-17 17:09:04 UTC
Re: Mariss' power supply circuit
Les Watts
2002-06-18 06:09:40 UTC
Re: [CAD_CAM_EDM_DRO] Re: Mariss' power supply circuit
mariss92705
2002-06-18 14:14:59 UTC
Re: Mariss' power supply circuit
John H. Berg
2002-06-18 15:10:05 UTC
Re: [CAD_CAM_EDM_DRO] Re: Mariss' power supply circuit
John
2002-06-18 16:28:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: Mariss' power supply circuit
John H. Berg
2002-06-18 18:45:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Mariss' power supply circuit
mariss92705
2002-06-18 19:19:01 UTC
Re: Mariss' power supply circuit
Les Watts
2002-06-18 19:27:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: Mariss' power supply circuit
Doug Fortune
2002-06-18 21:33:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: Mariss' power supply circuit
John H. Berg
2002-06-18 21:37:51 UTC
Re: [CAD_CAM_EDM_DRO] Re: Mariss' power supply circuit
John H. Berg
2002-06-18 22:01:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: Mariss' power supply circuit
Les Watts
2002-06-19 05:08:52 UTC
Re: [CAD_CAM_EDM_DRO] Re: Mariss' power supply circuit
Jon Elson
2002-06-19 10:49:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Mariss' power supply circuit
mariss92705
2002-06-19 12:23:51 UTC
Re: Mariss' power supply circuit
Les Watts
2002-06-19 13:40:22 UTC
Re: [CAD_CAM_EDM_DRO] Re: Mariss' power supply circuit
Keith Bowers
2002-06-19 14:46:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: Mariss' power supply circuit
Les Watts
2002-06-19 16:10:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: Mariss' power supply circuit
Keith Bowers
2002-06-19 16:52:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: Mariss' power supply circuit
jmkasunich
2002-06-19 19:07:39 UTC
Re: Mariss' power supply circuit
jmkasunich
2002-06-19 19:07:39 UTC
Re: Mariss' power supply circuit
Jon Elson
2002-06-19 19:42:04 UTC
Re: [CAD_CAM_EDM_DRO] Re: Mariss' power supply circuit
wanliker@a...
2002-06-19 19:53:48 UTC
Re: [CAD_CAM_EDM_DRO] Re: Mariss' power supply circuit
Jon Elson
2002-06-19 19:54:51 UTC
Re: [CAD_CAM_EDM_DRO] Re: Mariss' power supply circuit
Paul Amaranth
2002-06-19 20:01:18 UTC
Re: [CAD_CAM_EDM_DRO] Re: Mariss' power supply circuit
Jon Elson
2002-06-19 20:10:47 UTC
Re: [CAD_CAM_EDM_DRO] Re: Mariss' power supply circuit
wanliker@a...
2002-06-19 21:08:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: Mariss' power supply circuit
Peter Seddon
2002-06-20 03:17:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: Mariss' power supply circuit
bjammin@i...
2002-06-20 05:09:06 UTC
Re: [CAD_CAM_EDM_DRO] Re: Mariss' power supply circuit
jmkasunich
2002-06-20 06:45:07 UTC
Re: Mariss' power supply circuit
mariss92705
2002-06-20 10:34:38 UTC
Re: Mariss' power supply circuit
wanliker@a...
2002-06-20 10:55:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Mariss' power supply circuit
bsptrades
2002-06-20 11:07:37 UTC
Re: Mariss' power supply circuit
mariss92705
2002-06-20 11:22:03 UTC
Re: Mariss' power supply circuit
JanRwl@A...
2002-06-20 11:31:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Mariss' power supply circuit
jmkasunich
2002-06-20 11:46:01 UTC
Re: Mariss' power supply circuit
mariss92705
2002-06-20 13:00:39 UTC
Re: Mariss' power supply circuit
wanliker@a...
2002-06-20 13:57:13 UTC
Re: [CAD_CAM_EDM_DRO] Re: Mariss' power supply circuit
mariss92705
2002-06-20 14:02:22 UTC
Re: Mariss' power supply circuit