CAD CAM EDM DRO - Yahoo Group Archive

Re: need help emc backlash

Posted by armadhas
on 2002-06-30 22:59:52 UTC
jon
the ammount of backlash is .027 new machine still setting it up
peter

--- In CAD_CAM_EDM_DRO@y..., Jon Elson <elson@p...> wrote:
> armadhas wrote:
>
> > hi
> >
> > i am having trouble with emc
> > when the backlash amount is set in the axis setup
> > the machine runs at the set feed rates but the backlash when
tacking
> > it up runs at full speed and it seems to make no differnce
> > what any of the speed setting are set to in the emc.ini file
> > it takes it out that fast it skips steps on the steppers
>
> How much is your backlash? I think the scheme used is really
> only designed for backlash in the .001" range.
>
> Jon

Discussion Thread

armadhas 2002-06-30 21:50:22 UTC need help emc backlash Jon Elson 2002-06-30 22:42:14 UTC Re: [CAD_CAM_EDM_DRO] need help emc backlash armadhas 2002-06-30 22:59:52 UTC Re: need help emc backlash Ray Henry 2002-07-01 08:15:24 UTC Re: Re: need help emc backlash armadhas 2002-07-01 15:40:26 UTC Re: need help emc backlash Jon Elson 2002-07-01 20:31:28 UTC Re: [CAD_CAM_EDM_DRO] Re: need help emc backlash