CAD CAM EDM DRO - Yahoo Group Archive

Re: Ericsson chips, Camtronics driver

Posted by Tim Goldstein
on 2000-01-17 11:53:26 UTC
Have you tried asking Dan if he could help you with these (both the chips
and getting the board figured out)?

I have been using Dan's board for about 1 year now and I run it at the full
5 amp level. I have not had a single failure with any components on the
board. If you are smoking the 5v regulator there is definitely something
wrong in your board.

Tim
[Denver, CO]


> Does anyone know of a US retail source
> for the Ericsson PBD3517 and PBL3776
> chips used in Dan Mausch's driver board?
>
> I'm having trouble getting mine going,
> so I presume I've fried some parts. If
> I'm going to be able to count on this
> driver, I'll need spares. One axis used
> to work well, but I've had to replace
> the 7805 twice, so I added a heat sink
> and 1A fuse in +5v circuit. How much
> should it really be drawing?

Discussion Thread

Roger Brower 2000-01-17 09:41:46 UTC Ericsson chips, Camtronics driver Tim Goldstein 2000-01-17 11:53:26 UTC Re: Ericsson chips, Camtronics driver Bjorn Lehnardt 2000-01-17 23:32:55 UTC Re: Ericsson chips, Camtronics driver beer@s... 2000-01-18 09:46:20 UTC Ericsson chips, Camtronics driver