Re: [CAD_CAM_EDM_DRO] Fanuc question
Posted by
John Branlund
on 2002-07-03 09:22:44 UTC
And 80% of the trucks on the road are Peterbuilts but you may have to learn
how to drive on an GM truck.
IMHO, machinists build stuff from basic material using what tools and
tooling the shop has. So a machinist has to learn how to plan, setup, cut,
and be flexible with the choice of available tools & tooling.
The same also applies to the controller on the CNC machine.
JohnB
how to drive on an GM truck.
IMHO, machinists build stuff from basic material using what tools and
tooling the shop has. So a machinist has to learn how to plan, setup, cut,
and be flexible with the choice of available tools & tooling.
The same also applies to the controller on the CNC machine.
JohnB
Discussion Thread
no falloff
2002-07-03 08:58:45 UTC
Fanuc question
John Branlund
2002-07-03 09:22:44 UTC
Re: [CAD_CAM_EDM_DRO] Fanuc question
cnc002@a...
2002-07-03 09:22:54 UTC
Re: [CAD_CAM_EDM_DRO] Fanuc question
cnc002@a...
2002-07-03 10:22:23 UTC
Re: [CAD_CAM_EDM_DRO] Fanuc question
John
2002-07-03 13:34:52 UTC
Re: [CAD_CAM_EDM_DRO] Fanuc question
vavaroutsos
2002-07-03 20:04:58 UTC
Re: Fanuc question