Re: [CAD_CAM_EDM_DRO] stepper problem
Posted by
bjammin@i...
on 2002-07-11 05:11:11 UTC
Bad output transister.
At 06:44 AM 7/11/02 -0000, you wrote:
you have trouble.
OT subjects, that are not allowed on the CCED list.
Anti-virus request: Please do not add this email addy to address books
Belfab CNC - http://www.freeyellow.com/members/belfab/belfab.html
US Best MC - http://www.freeyellow.com/members/batwings/best.html
Camping/Caving - http://www.freeyellow.com/members/batwings/caving.html
Hac ahac que haec, hoc, hoc, patui
At 06:44 AM 7/11/02 -0000, you wrote:
>Hi,aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
>
>A friend tried to post this question but never made it. Hoping that
>someone can point out the most likely cause of this little problem of
>steppers moving only one direction.
>
>He has one 2-axis driver box with G201 which only move in the positve
>x and y direction. When commanded to move in the negative direction,
>the motors only emit a tingling sound, no movement. To eliminate the
>possibility of the step&direction signals being the culprit, the
>lathe was connected to another driver box (g201's) and movement was
>smooth both ways - positive as well as negative.
>
>What is the most likely cause with the problem driver box?
>
>Thanks.
>
>Andrew
>
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
>OFF Topic POSTS: General Machining
>If you wish to post on unlimited OT subjects goto:
you have trouble.
>http://www.metalworking.com/news_servers.htmlsister site to the CCED group, as many of the same members are there, for
>
>http://groups.yahoo.com/group/jobshophomeshop I consider this as a
OT subjects, that are not allowed on the CCED list.
>Regards, Hoyt
>
>
>Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Mom
>List Owner
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>
Anti-virus request: Please do not add this email addy to address books
Belfab CNC - http://www.freeyellow.com/members/belfab/belfab.html
US Best MC - http://www.freeyellow.com/members/batwings/best.html
Camping/Caving - http://www.freeyellow.com/members/batwings/caving.html
Hac ahac que haec, hoc, hoc, patui
Discussion Thread
andrewyslee
2002-07-10 23:44:08 UTC
stepper problem
bjammin@i...
2002-07-11 05:11:11 UTC
Re: [CAD_CAM_EDM_DRO] stepper problem
Jon Elson
2002-07-11 10:37:18 UTC
Re: [CAD_CAM_EDM_DRO] stepper problem
andrewyslee
2002-07-11 17:02:19 UTC
Re: stepper problem
mariss92705
2002-07-11 18:08:42 UTC
Re: stepper problem
Jon Elson
2002-07-11 22:39:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: stepper problem
andrewyslee
2002-07-11 23:23:05 UTC
Re: stepper problem
Jon Elson
2002-07-12 10:42:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: stepper problem
mariss92705
2002-07-12 11:03:20 UTC
Re: stepper problem
sdiken.rm
2002-07-15 01:31:13 UTC
Re: stepper problem