Re: [CAD_CAM_EDM_DRO] Robot
Posted by
John
on 2002-07-13 06:34:58 UTC
How much did that cost? You could arm it with a MIG torch and have it do
short prototype welding, you'd need a few more axes on the 'hand' probably.
Just make sure you buy a shotgun and rocket launcher in case you come in one
night and find it with an axe in your kitchen. We've all seen the films....
John H.
you have trouble.
subjects, that are not allowed on the CCED list.
short prototype welding, you'd need a few more axes on the 'hand' probably.
Just make sure you buy a shotgun and rocket launcher in case you come in one
night and find it with an axe in your kitchen. We've all seen the films....
John H.
> Much to my surprise, as I was searching the trading post classifieds Iaol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
> came across an advertisement for an almost working pick and place Robot.
>
> I have been searching, researching, saving and buying some parts for
> an xyyza table for 18 months. Now I am the proud owner of a six and a
> half foot robot 20 years old with one arm.
>
> Robot has a circular reach of 1.2 m by pirouetting at his base, 4
> beefy stepping motors (4.2") giving him a pick up of 10kg, Carbon
> fibre arms, a lift of maybe 100mm (not sure on that figure- basically
> a xyyza machine.
>
> I was after cad cam to assist with making architectural models, but ?
> I'm wondering if there is some better business that I could put my
> robot to? Something with an international client base would be good.
> Robot should be very accurate too as it is scientific and industrial,
> there seems to be little room for errors to creep in as the x y plane
> is operated by pivot direct from the steppers. I will post a photo
> when I get one
>
> I'm also looking for someone here in Melbourne, Australia to help me
> to upgrade the electronics and software.
>
> Interesting hey! Any good business ideas would be very welcome
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
you have trouble.
> http://www.metalworking.com/news_servers.htmlsister site to the CCED group, as many of the same members are there, for OT
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
subjects, that are not allowed on the CCED list.
>
>
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>