Re: [CAD_CAM_EDM_DRO] A Question to MARISS
Posted by
Peter
on 2002-07-30 13:13:09 UTC
Hi Raul,
I'm working on a similar project with Indexer and G-Code controller. I
designed an opto-isolation printed circuit to isolate all the signals
between PC parallel ports and Gecko based controller box. You
might have to do the same. I power one side of the optos from the
PC 5V rail and the other side from my contoller.
I'm working on a similar project with Indexer and G-Code controller. I
designed an opto-isolation printed circuit to isolate all the signals
between PC parallel ports and Gecko based controller box. You
might have to do the same. I power one side of the optos from the
PC 5V rail and the other side from my contoller.
Discussion Thread
Raul Lara
2002-07-30 11:53:19 UTC
A Question to MARISS
Peter
2002-07-30 13:13:09 UTC
Re: [CAD_CAM_EDM_DRO] A Question to MARISS
turbulatordude
2002-07-30 16:43:02 UTC
Re: A Question to MARISS
mariss92705
2002-07-30 18:16:14 UTC
Re: A Question to MARISS
mariss92705
2002-07-30 18:22:21 UTC
Re: A Question to MARISS
Peter
2002-07-30 19:24:08 UTC
Re: electrical noise - was Re: A Question to MARISS
Jon Elson
2002-07-30 19:57:30 UTC
Re: [CAD_CAM_EDM_DRO] A Question to MARISS
ralaco
2002-07-31 09:37:14 UTC
Re: A Question to MARISS
mariss92705
2002-07-31 11:09:20 UTC
Re: A Question to MARISS
ralaco
2002-07-31 16:02:04 UTC
Re: A Question to MARISS
ralaco
2002-07-31 16:03:07 UTC
Re: A Question to MARISS