RE: [CAD_CAM_EDM_DRO] automotive alternator as a Stepper Motor
Posted by
Dave Lantz
on 2002-07-31 10:56:28 UTC
sorry, here it is, i had forgoten what i had searched under, it was a google
search for : alternator stepper...
http://www.technosmith.com/abstracts/062_StepperMotorFromAlternator.htm
-----Original Message-----
From: Dave Lantz
Sent: Wednesday, July 31, 2002 1:50 PM
To: 'CAD_CAM_EDM_DRO@yahoogroups.com'
Subject: RE: [CAD_CAM_EDM_DRO] automotive alternator as a Stepper Motor
i did a web search on the topic, and found that by.... doing...something...
darn, didn't bookmark it, now i can't find it. but it claimed that by doing
something you could get 42 steps/rev out of one, and told to put a 4-8 amp
headlight in the curcuit to keep the motor from burning... i didn't bookmark
it, maybe someone else can find it---dave L.
-----Original Message-----
From: Jon Elson [mailto:elson@...]
Sent: Wednesday, July 31, 2002 1:43 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] automotive alternator as a Stepper Motor
Doug Fortune wrote:
per revolution, the inductance would be hideous, and it would
take a 3-phase drive, rather than 2/4 phase. Also, you'd need to
supply constant current to the rotor field, about 14 V at 2 A
or so. These units might make better 3-phase servo motors
with a somewhat more complex drive system. They would perform
about as well as a similar sized PM brushless servo motor, except
that they were not designed as servo motors, and so torque and velocity
ripple might be pretty high.
If you want a brushless servo drive, I suggest you watch eBay for a
commercial unit designed from the ground up for this use.
Jon
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister
site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Mom
List Owner
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister
site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Mom
List Owner
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
search for : alternator stepper...
http://www.technosmith.com/abstracts/062_StepperMotorFromAlternator.htm
-----Original Message-----
From: Dave Lantz
Sent: Wednesday, July 31, 2002 1:50 PM
To: 'CAD_CAM_EDM_DRO@yahoogroups.com'
Subject: RE: [CAD_CAM_EDM_DRO] automotive alternator as a Stepper Motor
i did a web search on the topic, and found that by.... doing...something...
darn, didn't bookmark it, now i can't find it. but it claimed that by doing
something you could get 42 steps/rev out of one, and told to put a 4-8 amp
headlight in the curcuit to keep the motor from burning... i didn't bookmark
it, maybe someone else can find it---dave L.
-----Original Message-----
From: Jon Elson [mailto:elson@...]
Sent: Wednesday, July 31, 2002 1:43 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] automotive alternator as a Stepper Motor
Doug Fortune wrote:
> I found this interesting note on an Australian website:Badly, very very badly! You would get something like 12 steps
> Anyone have an idea how this might work?
>
per revolution, the inductance would be hideous, and it would
take a 3-phase drive, rather than 2/4 phase. Also, you'd need to
supply constant current to the rotor field, about 14 V at 2 A
or so. These units might make better 3-phase servo motors
with a somewhat more complex drive system. They would perform
about as well as a similar sized PM brushless servo motor, except
that they were not designed as servo motors, and so torque and velocity
ripple might be pretty high.
If you want a brushless servo drive, I suggest you watch eBay for a
commercial unit designed from the ground up for this use.
Jon
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister
site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Mom
List Owner
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
http://www.metalworking.com/news_servers.html
http://groups.yahoo.com/group/jobshophomeshop I consider this as a sister
site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Mom
List Owner
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Discussion Thread
Doug Fortune
2002-07-30 23:07:45 UTC
automotive alternator as a Stepper Motor
Bob Dring
2002-07-31 04:21:35 UTC
Re: [CAD_CAM_EDM_DRO] automotive alternator as a Stepper Motor
ths992001
2002-07-31 07:46:43 UTC
Re: automotive alternator as a Stepper Motor
Jon Elson
2002-07-31 10:39:07 UTC
Re: [CAD_CAM_EDM_DRO] automotive alternator as a Stepper Motor
Dave Lantz
2002-07-31 10:49:44 UTC
RE: [CAD_CAM_EDM_DRO] automotive alternator as a Stepper Motor
Dave Lantz
2002-07-31 10:56:28 UTC
RE: [CAD_CAM_EDM_DRO] automotive alternator as a Stepper Motor
JanRwl@A...
2002-07-31 16:53:23 UTC
Re: [CAD_CAM_EDM_DRO] automotive alternator as a Stepper Motor
Cardinal.Eng
2002-08-01 05:23:52 UTC
Re: automotive alternator as a Stepper Motor