CAD CAM EDM DRO - Yahoo Group Archive

Re: Where to buy transformers?

on 2002-08-06 04:42:35 UTC
<snip>

> Many larger power supplies use a center-tapped winding, so that only
> 2 recifier diodes are needed. In that case, you will get 1/2 of
the voltage
> that would be obtained if you used the full winding into a bridge
rectifier.

I have a 6 tap xfrmr, 11 volt stages. One nice thing is you can
power N mosfets for both parts of an H-bridge.

but a center tap, would offer either the full voltage, or a half
voltage, or both at the same time. Of course, the limit is total VA.


Dave

Discussion Thread

ds_hutchins 2002-08-05 16:29:45 UTC Where to buy transformers? caudlet 2002-08-05 16:59:30 UTC Re: Where to buy transformers? Doug Harrison 2002-08-05 17:01:47 UTC Re: [CAD_CAM_EDM_DRO] Where to buy transformers? David L. Foreman 2002-08-05 17:11:25 UTC Re: [CAD_CAM_EDM_DRO] Where to buy transformers? Keith Bowers 2002-08-05 17:22:22 UTC Re: [CAD_CAM_EDM_DRO] Where to buy transformers? JanRwl@A... 2002-08-05 18:06:37 UTC Re: [CAD_CAM_EDM_DRO] Where to buy transformers? Robert Campbell 2002-08-05 18:54:49 UTC Re: [CAD_CAM_EDM_DRO] Where to buy transformers? galt1x 2002-08-05 19:01:01 UTC Re: [CAD_CAM_EDM_DRO] Where to buy transformers? Jon Elson 2002-08-05 21:45:14 UTC Re: [CAD_CAM_EDM_DRO] Where to buy transformers? turbulatordude 2002-08-06 04:42:35 UTC Re: Where to buy transformers? ds_hutchins 2002-08-06 11:22:27 UTC Re: Where to buy transformers? ds_hutchins 2002-08-06 12:00:12 UTC Re: power supply size [was: Where to buy transformers?] turbulatordude 2002-08-06 18:39:16 UTC Re: power supply size [was: Where to buy transformers?]