Re: Where to buy transformers?
Posted by
ds_hutchins
on 2002-08-06 11:22:27 UTC
It makes sense now that I think about it. My electronics book stated
that "the rms voltage is specified with a value equal to a DC voltage
that is capable of doing the same amount of work." I didn't stop to
think that the voltages would only be actually "equal" in a rectifier
circuit under full load; my mistake was forgetting that the cap pulls
voltage up to AC peak at part load.
Thanks for the correction and all the responses, this is a great list!
that "the rms voltage is specified with a value equal to a DC voltage
that is capable of doing the same amount of work." I didn't stop to
think that the voltages would only be actually "equal" in a rectifier
circuit under full load; my mistake was forgetting that the cap pulls
voltage up to AC peak at part load.
Thanks for the correction and all the responses, this is a great list!
> The RMS (Root Mean Square) voltage is a "average" of an AC signal
> (area under the curve). An AC wave actually has its peaks at the top
> of the wave form at about 160VAC (1.41 times the RMS of the normal
> 120VAC line). When you rectify than charge a cap it charges up to
> the peak value. If the cap is large enough to take the load and stay
> charged by the incomming wave than that is the voltage you will get.
> I normal practice the actual DC is slightly less than that but close
> enough. So for you answer: a 34V secondary will give you approx
> 48VDC output at the filter cap.
Discussion Thread
ds_hutchins
2002-08-05 16:29:45 UTC
Where to buy transformers?
caudlet
2002-08-05 16:59:30 UTC
Re: Where to buy transformers?
Doug Harrison
2002-08-05 17:01:47 UTC
Re: [CAD_CAM_EDM_DRO] Where to buy transformers?
David L. Foreman
2002-08-05 17:11:25 UTC
Re: [CAD_CAM_EDM_DRO] Where to buy transformers?
Keith Bowers
2002-08-05 17:22:22 UTC
Re: [CAD_CAM_EDM_DRO] Where to buy transformers?
JanRwl@A...
2002-08-05 18:06:37 UTC
Re: [CAD_CAM_EDM_DRO] Where to buy transformers?
Robert Campbell
2002-08-05 18:54:49 UTC
Re: [CAD_CAM_EDM_DRO] Where to buy transformers?
galt1x
2002-08-05 19:01:01 UTC
Re: [CAD_CAM_EDM_DRO] Where to buy transformers?
Jon Elson
2002-08-05 21:45:14 UTC
Re: [CAD_CAM_EDM_DRO] Where to buy transformers?
turbulatordude
2002-08-06 04:42:35 UTC
Re: Where to buy transformers?
ds_hutchins
2002-08-06 11:22:27 UTC
Re: Where to buy transformers?
ds_hutchins
2002-08-06 12:00:12 UTC
Re: power supply size [was: Where to buy transformers?]
turbulatordude
2002-08-06 18:39:16 UTC
Re: power supply size [was: Where to buy transformers?]