Re: [CAD_CAM_EDM_DRO] Re: Advice needed?.

Mark,

What is the voltage on the stepper motor name plate?

Bob

----- Original Message -----
From: "rmtuckeruk" <rmtucker@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Sunday, August 18, 2002 12:54 PM
Subject: [CAD_CAM_EDM_DRO] Re: Advice needed?.


> --- In CAD_CAM_EDM_DRO@y..., "Robert Campbell" <bob@c...> wrote:
> > Mark,
> >
> > The numbers sound OK. 300 oz/in should be enough. I have used 350
> oz/in on
> > my gantry.
> >
> > Check your acceleration values. If you try and accelerate too fast
> it will
> > cause the stepper motors to stall.
> >
> > Like Fred said, check you power supply.
> >
> > What type drives are you using?
> >
> > Bob Campbell
> >
> > www.campbelldesigns.com
> > ----- Original Message -----
> > From: "rmtuckeruk" <rmtucker@l...>
> > To: <CAD_CAM_EDM_DRO@y...>
> > Sent: Sunday, August 18, 2002 12:14 PM
> > Subject: [CAD_CAM_EDM_DRO] Advice needed?.
> >
> >
> I have released the anti backlash nuts and the driver is a camtronics
> bipolar chopper 5a.power supply i believe is 36v.
>
> thanx
> mark
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>