G-code
Posted by
Brian
on 2002-08-22 18:50:16 UTC
Hi Gang, Well i have done egraving with my small 3 axis mill, i also did g81 peck the drill for a jig plate,and have done some move from point "a" to point "b" with depth changes. today i used a small cam program and made pocket, with a bore in it, and then a ring in it and a post in it....Either i have a real case of Machine"itus" or this stuff is beginning to make sense! I also cheated the softwear and adjusted the hole size by changing the size of the tool diameter(insoftwear).....I am having FUN now! cul brian f.
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
Discussion Thread
Brian
2002-08-22 18:50:16 UTC
G-code
Mike
2002-08-23 18:26:36 UTC
RE: [CAD_CAM_EDM_DRO] G-code
Jon Elson
2002-08-23 20:40:01 UTC
Re: [CAD_CAM_EDM_DRO] G-code
Brian
2002-08-24 10:02:18 UTC
Re: [CAD_CAM_EDM_DRO] G-code
Brian
2002-08-24 12:51:04 UTC
Re: [CAD_CAM_EDM_DRO] G-code
andrewyslee
2002-08-24 13:52:10 UTC
Re: G-code
Alan Marconett KM6VV
2002-08-24 15:43:54 UTC
Re: [CAD_CAM_EDM_DRO] G-code
Brian
2002-08-24 18:36:28 UTC
Re: [CAD_CAM_EDM_DRO] G-code
Mike
2002-08-26 18:48:38 UTC
RE: [CAD_CAM_EDM_DRO] G-code