CAD CAM EDM DRO - Yahoo Group Archive

Re: Any recommendations for a g-code interpreter

Posted by caudlet
on 2002-09-04 05:32:50 UTC
--- In CAD_CAM_EDM_DRO@y..., "kimvellore" <kim@b...> wrote:
> I am going through conversion of my endmill to CNC and for a start
I
> am looking for a g-code interpreter. Is there any favorite program
in
> this group or for the hobbyist? I have x,y,z and a rotary table to
> control.
> Thanks
> Kim

I order to get any meaningful feedback you need to give us a little
more information:

1. How many pulses per second (max) do you need into the drive
circuits? You will need to work backwards from your desired IPM. If
you don't know the PPS then give us the drive train ratios and info
along with if you are running full, half or other step ratio in the
motor drives.

2. Any preference on the Operating System (OS) of the computer you
want to use? DOS, Windows, Linux ?

3. How fast is the computer you want to use with the program.

4. Do you want expensive, cheap, or free?

Finally, there is tons of information in the archives and older
messages about what you are asking; probably more information than
you need!

Discussion Thread

kimvellore 2002-09-03 19:33:49 UTC Any recommendations for a g-code interpreter kimvellore 2002-09-03 19:36:41 UTC Any recommendations for a g-code interpreter caudlet 2002-09-04 05:32:50 UTC Re: Any recommendations for a g-code interpreter mart_wid 2002-09-04 05:53:42 UTC Re: Any recommendations for a g-code interpreter John Bell 2002-09-04 07:56:39 UTC Circuit or Kit kimvellore 2002-09-04 09:54:02 UTC Re: Any recommendations for a g-code interpreter j.guenther 2002-09-04 10:05:37 UTC RE: [CAD_CAM_EDM_DRO] Re: Any recommendations for a g-code interpreter Tim Goldstein 2002-09-04 12:50:40 UTC Re: [CAD_CAM_EDM_DRO] Circuit or Kit JJ 2002-09-04 17:14:24 UTC RE: [CAD_CAM_EDM_DRO] Circuit or Kit Steve Blackmore 2002-09-04 17:35:00 UTC Re: [CAD_CAM_EDM_DRO] Circuit or Kit Steve Blackmore 2002-09-04 17:37:05 UTC Re: [CAD_CAM_EDM_DRO] Circuit or Kit JJ 2002-09-04 18:08:14 UTC RE: [CAD_CAM_EDM_DRO] Circuit or Kit