RE: [CAD_CAM_EDM_DRO] Gecko 210 VS 201 difference?

Would you mind sharing what the specs are for your pc?

i.e. the type of motherboard that you are using, and any other
information that you may know of?



-----Original Message-----
From: Robert Campbell [mailto:bob@...]
Sent: September 9, 2002 7:30 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: Re: [CAD_CAM_EDM_DRO] Gecko 210 VS 201 difference?

Kim,

In my case, I did not think that my pc could generate enough pulses
using
the 201 (2,000 pulse per revolution) to move my cnc router at the rated
(inches/minute) that I wanted my CNC router to run at.

I set my 210 to 1,000 pulses per revolution and my CNC router ran fine.

Currently I am using a 201 for my Z axis.

If you are going to run a small mill, the 201 will be fine.

Bob Campbell

----- Original Message -----
From: "kimvellore" <kim@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Monday, September 09, 2002 3:54 PM
Subject: [CAD_CAM_EDM_DRO] Gecko 210 VS 201 difference?


> I have been looking into both the drivers and can any one tell me the
> pratical advantages of 210 over 201 when using it for a CNC
> application. 210 has options for full step, half step, 5uSetp and
> 10uStep, where as 201 has only 10uStep per step option. If I were to
> use only 10uStep per step then there will be no advantage of 210 over
> 201. So where will one use 5uS or half step?
>
> Thanks
> Kim
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there,
for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>


Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it
if you have trouble.
http://www.metalworking.com/news_servers.html

http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Mom
List Owner



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/