Re: Gecko 210 VS 201 difference?

Take a look a deskam win-nc
It is windows based with a interface card. Carl said they are getting
40,000 pulses with this set up.
Looks very sweet.
The gcodes available i this program are great. Has constant
contouring cutter comp g53 ect part offsets. Home and limit switch
set ups.
I just dont like rewiring from a serial port but I guess Ill have to
do it. *%*%#%%#$^
Carl said they ahve a router running at 600 ipm with it from windows.

I like the interface for the cnc control .. Sweet and simple.
They have a free demo to look at on the site. Its worth a look.

Darrel

--- In CAD_CAM_EDM_DRO@y..., "Lloyd Leung" <lloyd@l...> wrote:
> Would you mind sharing what the specs are for your pc?
>
> i.e. the type of motherboard that you are using, and any other
> information that you may know of?
>
>
>
> -----Original Message-----
> From: Robert Campbell [mailto:bob@c...]
> Sent: September 9, 2002 7:30 PM
> To: CAD_CAM_EDM_DRO@y...
> Subject: Re: [CAD_CAM_EDM_DRO] Gecko 210 VS 201 difference?
>
> Kim,
>
> In my case, I did not think that my pc could generate enough pulses
> using
> the 201 (2,000 pulse per revolution) to move my cnc router at the
rated
> (inches/minute) that I wanted my CNC router to run at.
>
> I set my 210 to 1,000 pulses per revolution and my CNC router ran
fine.
>
> Currently I am using a 201 for my Z axis.
>
> If you are going to run a small mill, the 201 will be fine.
>
> Bob Campbell
>
> ----- Original Message -----
> From: "kimvellore" <kim@b...>
> To: <CAD_CAM_EDM_DRO@y...>
> Sent: Monday, September 09, 2002 3:54 PM
> Subject: [CAD_CAM_EDM_DRO] Gecko 210 VS 201 difference?
>
>
> > I have been looking into both the drivers and can any one tell me
the
> > pratical advantages of 210 over 201 when using it for a CNC
> > application. 210 has options for full step, half step, 5uSetp and
> > 10uStep, where as 201 has only 10uStep per step option. If I were
to
> > use only 10uStep per step then there will be no advantage of 210
over
> > 201. So where will one use 5uS or half step?
> >
> > Thanks
> > Kim
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
reach it
> if
> you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> > http://groups.yahoo.com/group/jobshophomeshop I consider this
as a
> sister site to the CCED group, as many of the same members are
there,
> for OT
> subjects, that are not allowed on the CCED list.
> >
> > NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
> THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
> >
> > Post messages: CAD_CAM_EDM_DRO@y...
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> > List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> > Moderator: jmelson@a... timg@k... [Moderator]
> > URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Mom
> > List Owner
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com to
reach it
> if you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
> sister site to the CCED group, as many of the same members are
there,
> for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
> Post messages: CAD_CAM_EDM_DRO@y...
> Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> Moderator: jmelson@a... timg@k... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/