Re: Use a scope todetermineovervoltageneededforstepper motors

Ward,
Thanks.
I'll think about the cheaper version later this year.... It's buy something or pay taxes,,, not a hard choice for me...
hansw

"Ward M." wrote:

> From: "Ward M." <ward@...>
>
> Hans,
>
> Right, these scopes can capture single shot events easily. I have used the
> 3034 to capture turn-on risetime for both current and voltage at various
> points in a somewhat compltx digital and analog mixed environment circuit.
> One thing that's really helpful is the Advanced Trigger Module which comes
> with the four channel scopes in the 3000 series. It can be added to the two
> channel scopes for extra $$$. Even without this risetime, falltime, pulse
> width, etc can easily be measured on single events. It's a really useful
> machine.
>
> Ward M.
>
> ----- Original Message -----
> From: "hansw" <hansw@...>
> To: <CAD_CAM_EDM_DRO@onelist.com>
> Sent: Saturday, January 29, 2000 6:39 AM
> Subject: Re: [CAD_CAM_EDM_DRO] Use a scope to
> determineovervoltageneededforstepper motors
>
> > From: hansw <hansw@...>
> >
> > Ward,
> > As you have your hands on this scope on a daily basis, ( I can only get to
> use one some times !) What I remember is I can
> > capture a fast event. I don't understand Jon's complaint that is can't do
> that... Even the $1195 item can do that... what am I
> > missing here...
> >
> > HansW
> >
> > "Ward M." wrote:
> >
> > > From: "Ward M." <ward@...>
> > >
> > > Hans,
> > >
> > > That is a pretty good scope, it's a 300MHz 2 channel and can do WAY more
> > > than the TDS210 or 220. I use a TDS3034 at work, a four channel version
> of
> > > this one, and it is a real pleasure to use. They finally got the user
> > > interface right, unlike the TDS540's. It will be interesting to see
> what
> > > this 3032 goes for.
> > >
> > > Ward M.
> > >
>
> --------------------------- ONElist Sponsor ----------------------------
>
> GET A NEXTCARD VISA, in 30 seconds. Get rates as low as 0.0 percent
> Intro APR and no hidden fees. Apply NOW.
> <a href=" http://clickme.onelist.com/ad/NextcardCreative7SR ">Click Here</a>
>
> ------------------------------------------------------------------------
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems in the above catagories.
> To Unsubscribe, read archives, change to or from digest.
> Go to: http://www.onelist.com/isregistered.cgi
> Log on, and you will go to Member Center, and you can make changes there.
> For the FAQ, go to http://www.ktmarketing.com/faq.html
> bill,
> List Manager