RE: [CAD_CAM_EDM_DRO] Bridgeport drum switch heaters for boss 3/4

Not that I would do it, but you can turn the heaters around on some
overloads. I.e. they point out instead of in.

Regards,
JJ

Be Kind, Be Careful, Be Yourself

> -----Original Message-----
> From: Douglas King [mailto:evelle97530@...]
> Sent: Sunday, September 15, 2002 2:12 PM
> To: CAD_CAM_EDM_DRO@yahoogroups.com
> Subject: [CAD_CAM_EDM_DRO] Bridgeport drum switch heaters for boss 3/4
>
>
> Hi.I have an old Boss3,that has been retro'd to a 4,and I also
> switched from 460,to 230 volts.The big drum switch,that looks like it
> was made by OEM electronics ,is kicking out.I need to install new
> heaters,or replace the switch with one that will handle the increased
> ampload.Does anyone out there have a good switch,or a set o'heaters?
> Thanks,Doug King,Metalheart Machine.
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
> aol://5863:126/rec.crafts.metalworking or go thru Google.com
> to reach it if you have trouble.
> http://www.metalworking.com/news_servers.html
>

http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Mom
List Owner



Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/