CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Bridgeport drum switch heaters for boss 3/4

Posted by John
on 2002-09-15 11:36:47 UTC
Sorry to sound dumb but what is the drum switch?

Thanks,
John


> Not that I would do it, but you can turn the heaters around on some
> overloads. I.e. they point out instead of in.
>
> Regards,
> JJ
>
> Be Kind, Be Careful, Be Yourself
>
>
>
> > -----Original Message-----
> > From: Douglas King [mailto:evelle97530@...]
> > Sent: Sunday, September 15, 2002 2:12 PM
> > To: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subject: [CAD_CAM_EDM_DRO] Bridgeport drum switch heaters for boss 3/4
> >
> >
> > Hi.I have an old Boss3,that has been retro'd to a 4,and I also
> > switched from 460,to 230 volts.The big drum switch,that looks like it
> > was made by OEM electronics ,is kicking out.I need to install new
> > heaters,or replace the switch with one that will handle the increased
> > ampload.Does anyone out there have a good switch,or a set o'heaters?
> > Thanks,Doug King,Metalheart Machine.
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > OFF Topic POSTS: General Machining
> > If you wish to post on unlimited OT subjects goto:
> > aol://5863:126/rec.crafts.metalworking or go thru Google.com
> > to reach it if you have trouble.
> > http://www.metalworking.com/news_servers.html
> >
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
> sister site to the CCED group, as many of the same members are there,
> for OT subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
> DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> OFF Topic POSTS: General Machining
> If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.
> http://www.metalworking.com/news_servers.html
>
> http://groups.yahoo.com/group/jobshophomeshop I consider this as a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.
>
> NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this group: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Mom
> List Owner
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Discussion Thread

Douglas King 2002-09-15 11:11:44 UTC Bridgeport drum switch heaters for boss 3/4 JJ 2002-09-15 11:30:16 UTC RE: [CAD_CAM_EDM_DRO] Bridgeport drum switch heaters for boss 3/4 John 2002-09-15 11:36:47 UTC Re: [CAD_CAM_EDM_DRO] Bridgeport drum switch heaters for boss 3/4 doug king 2002-09-15 14:14:26 UTC Re: [CAD_CAM_EDM_DRO] Bridgeport drum switch heaters for boss 3/4 Dave Engvall 2002-09-17 16:27:29 UTC Re: [CAD_CAM_EDM_DRO] Fanuc 7 M docs