Re: Oiler metering units...

Thanks !

I go to Phila at least once a month so I will swing by to see the
place.

I can use a few of the styles on my old 9" South Bend lathe as well.

Dave

--- In CAD_CAM_EDM_DRO@y..., "Lee Studley" <indigo_red@q...> wrote:
> Hi Dave,
> http://www.tricodistributor.com/
> go to the online catqalog-->table of contents-->
> central lubrication...
> There's an over all description on metering
> and pumps too. On my seriesII the meters are
> number "0" types (bearings,ballscrew,vertical
> non-Zaxis ways( ie sides of ways)..) except on
> ways that are load bearing, then they are
> number "1"'s.
>
> Enco has the best prices I've seem on the
> one-shot manual pumps at $39 or $70 for
> Enco generic or namebrand(bijor) These pumps
> seem to be able to apply oil at about 50-100psi max.
>
> -Lee
>
> --- In CAD_CAM_EDM_DRO@y..., "turbulatordude" <davemucha@j...>
wrote:
> > Can you guys post a link for these things ?
> >
> > I am currently oiling each joint by hand and know there is a
> better
> > One-Shot way.
> >
> > Dave
> >
> >
> >
> > --- In CAD_CAM_EDM_DRO@y..., "Lee Studley" <indigo_red@q...>
wrote:
> > > Tim,
> > > I played with one last night and came to
> > > the same conclusion. The new TRICO ones have
> > > little filters built into the inlets. Maybe the
> > > old ones did too and thats what is clogged up.
> > > -Lee